News

tower craneIts technology is now relatively mature, and with its continuous development and upgrading, it has gradually replaced the traditional equipment. So you know the application guide of tower crane? On this issue, the following is a detailed introduction for everyone.

tower craneIn fact, when it is used, we need to know a lot of relevant information. What you need to know here is that it is a kind of lifting equipment commonly used on construction sites, also known as "tower crane". When you see it in the future, you will know that it is actually a section-by-section extension (high) (referred to as "standard section"). Therefore, tower crane is used to hang construction raw materials such as steel bars, wooden cranes, concrete, steel pipes, etc. Tower crane is an essential equipment on the site. If you explain this way, I believe everyone will understand. For these basic knowledge points, at least we will know what it is when we see it. Of course, its advantages are also more. And it's all reflected in different places. In addition, we also need to know that the function of this tower crane is to bear the upper load from the boom pull rope and the balance arm pull rope, and through the structure of the rotating tower, turntable, bearing seat, etc. And its component type is directly transferred to the tower structure through the turntable. Therefore, when worrying about it, it is natural to be clear that the top of its self-rising tower has truncated cone column type, forward or backward truncated cone column type, herringbone frame type and diagonal brace type.

Tower crane as an indispensable equipment in the construction industry. In the future, when you use it, you should also understand these basic information. For example, all the upper rotary tower crane need to set the balance weight, then its function is to support the balance weight at this time, and the tower crane is mainly used to form the balance moment that is opposite to the lifting moment in the direction required by the design. In addition to the balance weight, the tower crane is often equipped with a lifting mechanism at its tail. As the main product of our factory, thanks to the strong support of new and old customers, while ensuring the reliability of product quality, we also benefit our customers. If you have any technical problems related to the product, you can come here at any time to consult. In addition, the reason why the lifting mechanism of the tower crane we are talking about here is that it is placed at the tail end of the balance arm together with the counterweight. One can play a part of the counterweight, and of course there is a more important role. It can increase the distance between the rope drum and the spire guide wheel, and the tower crane is mainly to facilitate the winding of the wire rope and avoid the phenomenon of rope disorder. The amount of balance weight is inversely proportional to the length of the balance arm. Generally speaking, light tower crane should be at least 3~4t and heavy tower crane should be nearly 30t.

Anyway, abouttower craneYou can come here for advice on some relevant information about the application guide. After reading the content of the article, if you encounter such a thing, you will know where to choose. I hope it can help you.