How much do you know about the safety distance and safety device knowledge of QTD 160 tower crane supplier china? Let's have a simple understanding together!
1. Safe distance
When the tower crane is laid out, the floor plan should be drawn, especially in the real estate development area, where there are many residential buildings and tower cranes like forests, and the safety distance of adjacent tower cranes should be considered, and a distance of not less than 2m should be ensured in both the horizontal and vertical directions. Safe distance, the tower body and boom of adjacent tower cranes cannot interfere, and try to ensure that the tower crane can rotate freely when the wind is too strong. The safety distance between the rear arm of the tower crane and the adjacent buildings shall not be less than 50cm. The safe distance between the tower crane and the transmission line meets the requirements.
If the safety distance between the tower crane and the transmission line does not meet the requirements, a protective frame should be installed on the tower. The distance between the bamboo pole and the transmission line should not be less than 1m and must have a certain stability and strength to prevent it from being blown down by strong winds.

2. Safety device
In order to ensure the normal and safe use of tower cranes, we must compulsorily require tower cranes to have prescribed safety devices during installation, mainly including: lifting moment limiter, lifting weight limiter, height limiter, and amplitude limiter , Rotary limiter, hook safety device, reel safety device, wind direction anemometer, wire rope escape trough insurance, trolley anti-rope breaking device, trolley anti-breaking shaft device and buffer, etc. These safety devices must ensure that it is intact, sensitive and reliable. If damage is found during use, it should be repaired and replaced in time, and it should not be lifted or adjusted arbitrarily.
The above is some knowledge introduction about QTD 160 tower crane supplier china.